|
Products
with Military and Aerospace Applications
NSN Numbers for
CHRISTO-LUBE® Products
Military and Aerospace CHRISTO-LUBE® Products
Lubrication Technology, Inc. manufactures high technology synthetic
lubricants based on perfluoropolyethers, fluorinated polysiloxanes,
esters, polyalphaolefins and synthetic hydrocarbon cooligimers under
the trade name CHRISTO-LUBE®.
MIL-SPEC Products
CHRISTO-LUBE® MCG 111
is qualified to MIL-PRF-27617F, Types I, II, and III. CHRISTO-LUBE®
MCG 111 is a chemically inert, oxygen compatible, perfluoropolyether
(PFPE) grease lubricant. MCG 111 has an operating temperature range
of -100° F to 450°F. Uses for CHRISTO-LUBE®
MCG 111 include all types of life support systems, including open
and closed circuit diving, aviation oxygen, hyperbaric chambers
and medical gas regulators. Other uses for MCG 111 include instrumentation,
pneumatic cylinders and electrical contacts and switches.
CHRISTO-LUBE® MCG 116 is qualified
to MIL-PRF-27617F, Type III. CHRISTO-LUBE® MCG 116
is also a chemically inert, oxygen compatible perfluoropolyether
(PFPE) grease lubricant. Characteristics of MCG 116 are generally
the same as those of MCG 111, except MCG 116 has a more-limited
operating temperature range of -30° F to 450° F.
Other Products with Military and Aerospace Applications
CHRISTO-LUBE® MCG 106 is
a chemically inert perfluoropolyether (PFPE) grease used in weapons
guidance systems and other applications requiring low temperature
starting and running torque. MCG 106 has an operating temperature
range of -140° F to 450°F. MCG 106 contains a PFPE-soluble
corrosion inhibitor for protection of lubricated parts in long-term
storage.
CHRISTO-LUBE® MCG 117 is
a chemically inert perfluoropolyether (PFPE) grease used in instrumentation,
guidance systems and other aerospace applications. MCG 117 has an
operating temperature range of -100° F to 550°F.
MCG 117 is useful in applications requiring extremely low vapor
pressure.
return to top
NSN NUMBERS FOR CHRISTO-LUBE® PRODUCTS
CHRISTO-LUBE® MCG 111
|
NSN NUMBER
|
SIZE
|
DESCRIPTION
|
|
9150-01-088-0498
|
2-oz TUBE
|
GREASE, AIRCRAFT AND INSTRUMENT
(MIL-PRF-27617F, TYPE II)
|
|
9150-01-441-9016
|
2-oz TUBE
|
GREASE, AIRCRAFT AND INSTRUMENT
(CHRISTO-LUBE® MCG 111)
|
|
9150-01-311-9771
|
1.75-lb or 1-lb CAN
|
GREASE, AIRCRAFT AND INSTRUMENT
(MIL-PRF-27617F, TYPE I)
|
|
9150-01-364-0218
|
8-oz TUBE
|
GREASE, AIRCRAFT AND INSTRUMENT
(CHRISTO-LUBE® MCG 111)
|
|
9150-01-358-5154
|
1.75-lb CAN
|
GREASE, AIRCRAFT AND INSTRUMENT
(MIL-PRF-27617F, TYPE III)
|
|
9150-01-007-4384
|
8-oz TUBE
|
GREASE, AIRCRAFT AND INSTRUMENT
(MIL-PRF-27617F, TYPE I)
|
CHRISTO-LUBE® MCG 116
|
NSN NUMBER
|
SIZE
|
DESCRIPTION
|
|
9150-00-961-8995
|
8-oz TUBE
|
GREASE, PLUG VALVE (MIL-PRF-27617F, TYPE III)
|
|
9150-01-358-5154
|
1.75-lb CAN
|
GREASE, AIRCRAFTAND INSTRUMENT
(MIL-PRF-27617F, TYPE III)
|
CHRISTO-LUBE® MCG 106
|
NSN NUMBER
|
SIZE
|
DESCRIPTION
|
|
9150-01-324-4677
|
2-oz TUBE
|
GREASE, AIRCRAFT AND INSTRUMENT
|
CHRISTO-LUBE® MCG 117
|
NSN NUMBER
|
SIZE
|
DESCRIPTION
|
|
9150-01-176-2224
|
2-oz TUBE
|
GREASE, INSTRUMENT
|
return to top
CHRISTO-LUBE® MCG 111
CHRISTO-LUBE® MCG 111 is a wide temperature range,
perfluoropolyether grease which was developed for use in
systems where non-reactivity with harsh chemicals including
strong acids and oxidizers, fuels, solvents, etc. is an
important factor. The grease is suitable for use in applications
including electrical contacts, valves, threads, screws,
bearings and in systems employing elastomeric and plastic
seals, gaskets and o-rings. Although CHRISTO-LUBE® MCG
111 is very inert, newly exposed rubbing surfaces of aluminum
and magnesium may react with the grease under certain extreme
conditions. CHRISTO-LUBE® MCG 111 meets the specification
requirements and has been qualified under Military Specification
MIL-PRF-27617F, Types I, II, and III.
|
PERFORMANCE TEST
|
TEST METHOD
|
CONDITION
|
TYPICAL VALUE
|
|
Temperature Range
|
|
|
-100°F to 450°F
|
| |
|
|
|
|
NLGI No.
|
|
|
1-2
|
| |
|
|
|
| |
|
|
|
|
Worked Penetration
|
ASTM D-1403
|
60 strokes
|
265-325
|
| |
|
|
|
| |
|
|
|
|
Evaporation
|
ASTM D-2595
|
22 hrs, 400°F, max
|
1.70%
|
| |
|
|
|
| |
|
|
|
|
Oil Separation
|
FED-STD-791, Method 321
|
30 hrs, 400°F, max
|
12.75%
|
| |
|
|
|
| |
|
|
|
|
Four-Ball Wear Test
|
ASTM D-2266
|
1200 rpm, 40kg, 167°F, 52100 steel, 1
hour
|
1.00 mm
|
| |
|
2 hours
|
1.50 mm
|
| |
|
|
|
| |
|
|
|
|
Low Temperature Torque
|
ASTM D-1478
|
@-65°F, Starting, max
|
576 g-cm
|
| |
|
60 min Running, max
|
300 g-cm
|
| |
|
|
|
| |
|
|
|
|
Copper Corrosion
|
ASTM D-130
|
24 hrs, 212°F
|
1b
|
|
|
|
|
|
| |
|
|
|
|
LOX Impact Sensitivity
|
ASTM D-2512
|
20 Impacts
from 1100 mm
|
No Reaction
|
| |
|
|
|
|
Oxidation Stability
|
ASTM D-492
|
250°F, 100 hrs
|
0 psi Drop
|
| |
|
|
|
FREE OF OZONE DEPLETION COMPOUNDS (ODC)
return to top
CHRISTO-LUBE® MCG 116
CHRISTO-LUBE® MCG 116 is a wide temperature range,
perfluoropolyether grease. It is intended for use in systems
where non-reactivity with harsh chemicals including strong
acids and oxidizers, fuels, solvents, etc. is an important
factor. The grease is suitable for use in applications including
electrical contacts, valves, threads, screws, bearings and
in systems employing elastomeric and plastic seals, gaskets
and o-rings. Although CHRISTO-LUBE® MCG 116 is very
inert, newly exposed rubbing surfaces of aluminum and magnesium
may react with the grease under certain extreme conditions.
CHRISTO-LUBE® MCG 116 meets the specification requirements
and has been qualified under Military Specification MIL-PRF-27617F,
Type III.
|
PERFORMANCE TEST
|
TEST METHOD
|
CONDITION
|
TYPICAL VALUE
|
|
Temperature Range
|
|
|
-30°F to 450°F
|
| |
|
|
|
|
NLGI No.
|
|
|
2
|
|
Unworked Penetration
|
ASTM D-1403
|
77°F
|
265-300
|
|
Worked Penetration
|
ASTM D-1403
|
60 strokes
|
265-300
|
| |
|
|
|
|
Evaporation
|
ASTM D-2595
|
22 hrs, 400°F, max
|
0.5%
|
|
Oil Separation
|
FED-STD-791, Method 321
|
30 hrs, 400°F, max
|
10.0%
|
|
Water Washout
|
ASTM D-1264
|
1 hr @ 100°F
|
0.50%
|
| |
|
|
|
|
Oxidation Stability
|
ASTM D-492
|
250°F, 100 hrs
|
-1 psi
|
|
LOX Impact Sensitivity
|
ASTM D-2512
|
20 Impacts
from 1100 mm
|
No Reaction
|
| |
|
|
|
|
Resistance to Aqueous Solution
|
FED-STD-791, Method 5415
|
168 hrs @77°F
|
Pass
|
|
Solubility in Fuel
|
FED-STD-791, Method 5415
|
77°F
|
0.5%
|
|
Resistance to Fuel
|
FED-STD-791, Method 5414
|
8 hrs @ 77°F
|
Pass
|
|
Film Stability and Corrosion on Steel
|
MIL-PRF-27617F
|
168 hrs @ 212°F
|
Pass
|
| |
|
|
|
|
Four-Ball Wear Test
|
ASTM D-2266
|
1200 rpm, 40kg, 167°F, 52100 steel, 1
hour
|
1.00 mm
|
| |
|
2 hours
|
1.50 mm
|
|
Low Temperature Torque
|
ASTM D-1478
|
@-30°F, Starting, max
|
4000 g-cm
|
| |
|
|
|
| |
|
Running, max
|
1500 g-cm
|
|
High Temperature Bearing Test
|
ASTM D-3336
|
10,000 rpm @400°F
|
500+ hrs
|
|
Copper Corrosion
|
ASTM D-130
|
24 hrs, 212°F
|
1a
|
FREE OF OZONE DEPLETION COMPOUNDS (ODC)
return to top
CHRISTO-LUBE® MCG 106
CHRISTO-LUBE® MCG 106 is a wide temperature range, perfluoropolyether
grease which is especially useful in low-pressure vacuum systems
and other systems where non-reactivity with harsh chemicals including
strong acids and oxidizers, fuels, solvents, etc. is mandatory.
The grease is suitable for use over an operating temperature range
of -140°F to 450°F in applications including ball, roller,
plain spherical and needle bearings of large and small diameter,
electrical contacts, gears, splines, valves, screw actuators, and
in systems employing elastomeric and plastic seals, gaskets, and
o-rings. Although CHRISTO-LUBE®MCG 106 is very inert, newly
exposed rubbing surfaces of aluminum and magnesium may react with
the grease under certain extreme conditions.
|
PERFORMANCE TEST
|
TEST METHOD
|
CONDITION
|
TYPICAL VALUE
|
|
Temperature Range
|
|
|
-140°F to 450°F
|
|
NLGI No.
|
|
|
1-2
|
|
Unworked Penetration
|
ASTM D-1403
|
|
265-320
|
|
Worked Penetration
|
ASTM D-1403
|
60 strokes
|
265-330
|
| |
|
|
|
|
Evaporation
|
ASTM D-2595
|
22 hrs, 350°F, max
|
6.50%
|
| |
|
22 hrs, 400°F, max
|
11.00%
|
| |
|
22 hrs, 450°F, max
|
17.50%
|
| |
|
|
|
|
Low Temperature Torque
|
ASTM D-1478
|
@-65°F, Starting, max
Running
|
295 g-cm
65 g-cm
|
| |
|
@-100°F, Starting, max
Running
|
350 g-cm
100 g-cm
|
| |
|
@-140°F, Starting, max
Running
|
5900 g-cm
2000 g-cm
|
| |
|
|
|
|
Copper Corrosion
|
ASTM D-130
|
24 hrs, 212°F
|
1b, light brown stain
|
| |
|
|
|
|
LOX Impact Sensitivity
|
ASTM D-2512
|
20 Impacts
from 1100 mm
|
No Reaction
|
| |
|
|
|
|
Load Wear Index
|
ASTM D-2596
|
|
170
|
|
Last Non-seizure
|
|
Load/wear
|
80 kg/0.500 mm
|
|
Last seizure
|
|
Load/wear
|
600 kg/1.700 mm
|
|
Weld Point
|
|
Load, min
|
1000 kg +
|
|
Four Ball Wear
|
ASTM D-2266
|
1200 rpm, 167°F, 52100 steel, 40 kg, 2
hrs
|
0.70 mm
|
| |
|
|
|
|
Oxidation Stability
|
ASTM D-492
|
250°F, 100 hrs
|
0 psi Drop
|
| |
|
|
|
|
Vapor Pressure
|
Knudsen
|
68°F
|
10-4 Torr
|
FREE OF OZONE DEPLETION COMPOUNDS (ODC)
return to top
CHRISTO-LUBE® MCG 117
CHRISTO-LUBE® MCG 117 is a wide temperature range anti-rust
grease for use in extreme environments. It is suited for
use in systems where non-reactivity with harsh chemicals,
strong acids and oxidizers, fuels, solvents, etc. is mandatory,
and in vacuum systems where pressures may be as low as 10-12
Torr. The grease is suitable for the lubrication of ball,
plain spherical, roller and needle bearings, electrical
contacts, gears, splines, valves, screw actuators, and in
systems employing elastomeric and plastic seals, gaskets,
and o-rings. Although CHRISTO-LUBE® MCG 117 is very
inert, newly exposed rubbing surfaces of aluminum and magnesium
may react with the grease under certain extreme conditions.
|
PERFORMANCE TEST
|
TEST METHOD
|
CONDITION
|
TYPICAL VALUE
|
|
Temperature Range
|
|
|
-100°F to 550°F
|
|
NLGI No.
|
|
|
2
|
|
Unworked Penetration
|
ASTM D-1403
|
|
265-300
|
|
Worked Penetration
|
ASTM D-1403
|
60 strokes
|
265-300
|
| |
|
|
|
|
Evaporation
|
ASTM D-2595
|
22 hrs, 400°F, max
|
0.10%
|
| |
|
22 hrs, 450°F, max
|
0.20%
|
| |
|
|
|
|
Oil Separation
|
FED-STD-791, Method 321
|
30 hrs, 400°F, max
|
11.00%
|
| |
|
|
|
|
Rust Preventive Properties
|
ASTM D-1743
|
48 hrs, 125°F
|
#1, Pass
|
| |
|
|
|
|
Copper Strip Corrosion
|
FED-STD-791, Method 5309
|
24 hrs, 212°F
|
1b
|
| |
|
|
|
|
Four-Ball Wear Test
|
ASTM D-2266
|
1200 rpm, 40kg, 167°F, 52100 steel, 1
hour:
|
1.00 mm
|
| |
|
|
|
|
Load Wear Index
|
ASTM D-2596
|
|
150
|
|
Weld Point
|
|
Load, min
|
1000 kg +
|
| |
|
|
|
|
Vacuum Thermal Stability
|
NASA SP-R-0022A
|
24 hrs @ 6 x 10-6
|
|
|
Weight Loss
|
|
|
0.12%
|
|
Volatile Condensables
|
|
|
0.01%
|
|
Water Vapor Recovery
|
|
|
0.01%
|
| |
|
|
|
|
LOX Impact Sensitivity
|
ASTM D-2512
|
20 Impacts
from 1100 mm
|
No Reactions
|
| |
|
|
|
|
Oxidation Stability
|
ASTM D-942
|
250°F, 100 hrs
|
0 psi drop
|
FREE OF OZONE DEPLETION COMPOUNDS (ODC)
|
